FAQ

1. What water should be used into the Oxyhydrogen Purifier?
The Oxyhydrogen Purifier should be filled with distilled water or reverse osmosis water (RO water).

2. How many liters of water can be filled into the Oxyhydrogen Purifier?
Only 1.5 liters of distilled water or reverse osmosis water (RO water) is Required.

3. How long should 1.5 liters of water be changed?
Less usage duration: change once every 10 days Frequent usage duration: change once every 7 days

4. Do we need to wait for an hour after changing the water?
Yes, after changing the water, the Oxyhydrogen Purifier needs to wait for an hour before it can be used.

5. Do we fill in water first and then switch on the Oxyhydrogen Purifier or switch on the Oxyhydrogen Purifier and then fill in water?
We must fill in distilled water or reverse osmosis water (RO water) before switch on the Oxyhydrogen Purifier.

6. How do I know that the Oxyhydrogen Purifier has been activated?
Once the "Status Indicator" lights up blue, it means that the Oxyhydrogen Purifier has Activated.

7. Why does TDS light up?
The "TDS" light is on because incorrect water is filled.

8. Why does OVERHEAT light up?
The "OVERHEAT" light is on because the electrolytic plate is overheated. It is recommended to use the Oxyhydrogen Purifier for 2 hours and then shut down for half an hour before use it again.

9. Why does WATER SHORTAGE light up?
The "WATER SHORTAGE" light is on because there is insufficient water in the water Tank.

10. Why does IMBALANCE light up?
The "IMBALANCE" light is on because the Oxyhydrogen Purifier is moved/transferred too much, making the water in the water tank unbalanced. It needs to set aside and wait for an hour before use.

11. How should I place the Oxyhydrogen Purifier before use?
The Oxyhydrogen Purifier should be placed below your body height. During use, it is forbidden to tilt the device to prevent the water in the water tank from shaking and causing it to stop.

12. Can the Oxyhydrogen Purifier be used continuously without stopping?
Whenever the Oxyhydrogen Purifier is operated continuously for 2 hours, it needs to stop to dissipate heat; it can be used again after 30 minutes. It is not suitable to operate for a long time to avoid device damage.

13. Can the Oxyhydrogen Purifier be used on the eyes?
Yes, wear an eye mask for 30 minutes with only Hydrogen. If you feel that the eyes pressure is too high during use, you can deflate appropriately, and your eyes should be kept open.

14. Can the Oxyhydrogen Purifier be used on the ears?
Yes, use a single-tube inhaler tube for 30 minutes with only Hydrogen.

15. Why do water droplets appear inside the inhaler tube during inhalation?
When inhaling the Oxyhydrogen Purifier, the steam from the tube and the device will condense into water. Condensed water is harmless, so don't worry. You just need to remove the inhaler tube and shake out the water.

16. Is it better to inhale Hydrogen or drink Hydrogen water?
Inhaling Hydrogen and drinking Hydrogen water are actually the same, both are Hydrogen. One is through the breathing, which has a good effect on the cardiovascular and cerebrovascular system. The other is through the digestive system and then enters the blood, which has a beneficial effect on the digestive system. In fact, they are the Same.

17. How long is the lifespan of the Oxyhydrogen Purifier?
The main component of the Oxyhydrogen Purifier is the electrolytic platinum membrane plate, its theoretical lifespan is 3000 hours.

18. How to avoid damage to the Oxyhydrogen Purifier and make it last longer?
* When it is not used for a long time (more than 2-3 days) or needs to be moved/transferred, the water in the device must be emptied .
* Water quality requirements: Only distilled water or reverse osmosis water (RO water) can be used.
* Stay away from fire (no smoking when inhalation).

Coming Soon...

Coming Soon...